192.168.l.l – 192.168.1.1 Admin Login Settings IP Address

192.168.l.l – 192.168.1.1 Admin Login Settings IP Address

192.168.l.l and 192.168.1.1 are the two ip addresses used by most of the routers, for making their configuration settings. The 192.168.l.l Admin is the command used while making network changes. In this guide, we will be giving you full instructions for configuring your router using 192.168.l.l Login and 192.168.1.1 Admin Login. This is the default ip address of every router and helps to configure it.

192.168.l.l

192.168.l.l Admin Login Setup

192.168.l.l Login Admin is very easy to setup. Before we proceed towards how to configure your router with http //192.168.l.l you must have a laptop or pc, a router and a active internet connection. The router’s settings once made can changed later on also.  192.168.1.1 Login Admin is also opened by some router companies for setting up the modems. The default ip for router setup can be opened in browser by copying and pasting http 192.168 ll in the address bar.

How to Configure Router using 192.168.l.l or 192.168.1.1 IP Address ?

  • Open the default browser on your pc.
  • In the address menu, type 192.168.l.l or 192.168.1.1
  • Then, enter the default username and password to login into the configuration window.
  • Press enter key, select advanced setup from the menu which appears.
  • Select PPPOe or Bridge Mode.
  • Enter the Login details provided by your Internet Service Provider.
  • Click Save button and Reboot the router.
  • Dont forget to logout from the 192.168-ll admin panel.
  • Enjoy using the internet with your desired settings.
  • The 192.168.l.l Login settings can help you to completely setup your router.
  • Now, check the speed of your internet it will also be increased.

Why is 192.168.l.l Admin and 192.168.1.1 Login Used ?

These both commands are used in order to make the configuration settings of modems. It doesnot matters which brand you are using, these addresses are universal and can be opened on any computer. 192.168.l.l Admin Login is used by most of the router brands to login into the admin panel. 192.168-ll can also be accessed from the admin menu of 192.168 ll ip address.

Default Router Usernames and Passwords List

ModelsUsernamePasswordIp Address
BEFCMUH4[none]admin192.168.0.1
BEFSR81[none]admin192.168.1.1
BEFSRU31[none]admin192.168.1.1
BEFSX41[none]admin192.168.l.l
BEFVP41[none]admin192.168.l.l
BEFW11P1[none][none]192.168.1.1
BEFW11S4[none]admin192.168.1.1
E1000[none]admin192.168.1.1 admin
E1200adminadmin192.168.1.1
E1500[none]admin192.168.1.1
E1550[none]admin192.168.1.1
E1700[none]admin192.168.1.1 login
E2000adminadmin192.168.l.l
E2100Ladminadmin192.168.1.1
E2500[none]admin192.168.1.1
E3000adminadmin192.168.1.1
E3200adminadmin192.168.1.1
E4200[none]1adminAdmin 192.168.1.1
E4200admin1admin192.168.1.1
E800[none]admin192.168.1.1
E8350[none]admin192.168.1.1
E8400adminadminLogin 192.168.1.1
E900[none]admin192.168.1.1
EA2700adminadmin192.168.l.l
EA2750[none]admin192.168.1.1
EA3500adminadmin192.168.1.1
EA4500adminadmin192.168.1.1
EA6100adminadminLogin 192.168.l.l
EA6200adminadmin192.168.1.1
EA6350[none]admin192.168.1.1
EA6400adminadminAdmin Login 192.168.l.l
EA6500adminadmin192.168.1.1
EA6900adminadmin192.168.1.1
EA7300adminadmin192.168.1.1
EA7500adminadmin192.168.1.1
EA8500adminadmin192.168.l.l Ip Address
EA9200adminadmin192.168.1.1
EA9500[none]admin192.168.1.1
WAG120Nadminadmin192.168.1.1
WAG160Nadminadmin192.168.l.l
WAG310Gadminadmin192.168.1.1
WAG320Nadminadmin192.168.1.1
WAG354Gadminadmin192.168.1.1
WAG54Gadminadmin192.168.l.l
WAG54GP2adminadmin192.168.1.1
WAG54GSadminadmin192.168.1.1
WCG200[none]admin192.168.0.1
WRH54G[none]admin192.168.1.1
WRK54G[none]admin192.168.1.1
WRT100[none]admin192.168.1.1
WRT110[none]admin192.168.l.l
WRT120N[none]admin192.168.1.1
WRT1200ACadminadmin192.168.1.1
WRT150N[none]admin192.168.1.1
WRT160N[none]admin192.168.1.1
WRT160N-HP[none]admin192.168.1.1
WRT160NL[none]admin192.168.1.1
WRT1900ACadminadmin192.168.1.1
WRT1900ACSadminadmin192.168.1.1
WRT300N[none]admin192.168.1.1
WRT310N[none]admin192.168.1.1
WRT3200adminadmin192.168.1.1
WRT3200ACM[none]admin192.168.1.1
WRT320N[none]admin192.168.1.1
WRT330N[none]admin192.168.1.1
WRT350N[none]admin192.168.1.1
WRT400N[none]admin192.168.1.1
WRT51AB[none]admin192.168.1.1
WRT54AG[none]admin192.168.1.1
WRT54G[none]admin192.168.1.1
WRT54G2[none]admin192.168.1.1
WRT54G3G-AT[none]admin192.168.1.1
WRT54G3G-AU[none]admin192.168.1.1
WRT54G3G-EU[none]admin192.168.1.1
WRT54G3G-ST[none]admin192.168.1.1
WRT54G3G-UK[none]admin192.168.1.1
WRT54G3GV2-STadminadmin192.168.1.1

These above listed usernames and passwords are the default ones for every router which you will require in order to login into 192.168 ll and perform the configuration settings. After you login with these note it down, so that it becomes easier for you to login next time with the default id and password of your router.

Changing WEP/WPA Key of Router using 192.168.l.l IP Address

  • You must open any browser, we recommend using internet explorer.
  • In the address menu bar type 192.168.1.1 which is the default ip address of every router.
  • Click the security option in the menu.
  • Now, enter a strong Key as per your choice.
  • Press Save and Reboot after that.
  • You are done setting up a unique Wep/Wpa key for router.

How to do Router Login With 192.168.1.1 Admin Ip Address

  • You need to click on the browser
  • Then you have to surf through the page 192.168.1.1 Login
  • Enter the Id and Pass.
  • Change the Settings.
  • Reboot the modem.
  • Clear history and cookies in your browser.
  • Ping 192.168 ll in the command prompt.
  • If the internet is working slowly, apply command Flush 192.168.l.l Online.
  • Restart the internet connection.

How to configure your router using 192.168.l.l

Configuring router has always been a kind of job where many users fail eventually. The router will only work if all the settings and setup are made in a proper manner. Here we are about to share few steps to configure your router with the IP address 192.168.l.l

Step 1: Un box the router and check for other facilitated items

Routers generally come in wrapped boxes with some cables and user manual. It is the responsibility of a user to check all the items are present or not.

Step 2: Make proper connections

First, you’ll need to identify all the ports given to the router. In a Router, 4 LAN ports and one internet is present. Connect your router to the broadband modem through a short ethernet cable. Connect the modem to Internet port of the router. The router is assigned a private IP address specifically for a small area usage like a house.

Step 3: Connect to computer

Your LAN port should be connected to the computer via an Ethernet cable which will enable network for your computer. You can also connect to a laptop as the wifi network name and the default password will be printed on the router’s label.

Step 4: Open web browser and type https://192.168.l.l

In order to change and customize your router settings, you need to login in the default web page of the router provided by the company. Open up a new tab and type this URL in the browser

https://192.168.l.l

When the entered URL is absolutely correct, then you’ll be able to see the login page. But what if an error occurred

The common problem while you try to configure the router using IP address 192.168.l.l is the IP address itself. Many people enter wrong IP address like 192.168.l.l and try to configure their router but error page is loaded always. the entered IP address 192.168.l.l is actually a wrong IP address.

Every IP address is divided into four segments. Let’s say each segment to be X. Each of this segment is linked to each other with the symbol ‘.’. X.X.X.X is actually basic syntax for IP address. Each of the X can take value from 0 to 256 only. No alphabets and symbols can be considered.

The IP address 192.168.l.l is wrong because of user use ‘L’ symbol instead of ‘1’. But when right IP address is typed in the search box of the browser them login page will appear surely.

Step 5: Enter username and password

Once the login page appears, after you open 192.168.1.1 in the internet explorer, you can enter your default username and password is given to you by the router manufacturer. Once logged into the router, you can customize your router based on your requirements and change its settings. The router admin panel has various settings related to security, advanced setup etc.

Step 6: connect other devices

Once your router is configured using IP address 192.168.1.1 you’ll be able to create a wireless network for other devices also or in short let us say WIFI. You can connect to WIFI by using the password provided by the ISP( Internet Service Provider). In some cases you must call the helpline number of your internet service provider and ask them for the same, they have all the details about the router.

You can use the above listed default router login passwords for opening the router admin panel. These 192.168.l.l Admin passwords are for different router brands. Once you use these 192.168.1.1 Admin Login details you will be able to configure your routers. If you face any issue while making the 192.168.1.1 192.168.l.l Settings Online you can comment below without any hesitation.